EnjoyLED

How to fix the chandelier on the top of the chandelier

There are some basic requirements in the process of using the ceiling, such as decoration methods, installation precautions, follow-up maintenance and so on. Many homeowners may not be very experienced, so they ignore many important decoration considerations. Then you can first understand how the chandelier is fixed on the top, and then analyze the various installation methods and the precautions for the installation of the chandelier, so as to prepare for effective installation.

How the chandelier is attached to the ceiling

When installing chandeliers, large chandeliers are often installed under the floor or beam of the structural layer through suspenders or slings, and small chandeliers are often installed on joists. Boom or sling connection to the structural layer:

First, pre-embed iron parts or wooden bricks in the structural layer, and the wooden bricks must have a reliable force guarantee. The burial position should be accurate, and there should be enough room for connection adjustment. Transition joints are set on iron parts and wooden bricks to adjust the error of embedded parts, and can be connected with embedded parts by nails and welding. The boom, the sling are connected with the transition piece.

What are the precautions for the installation of chandeliers?

1. When there are multiple chandeliers under the same ceiling, you can install the chandeliers at the same time when installing the ceiling, so as to adjust the height and horizontal position of the lights in time.

Home improvement ceiling is a common link in home improvement. Depending on the material of the decorative panel, the ceiling is classified differently. Ceiling decoration materials are the main basis for distinguishing the names of ceilings, mainly including: light steel keel gypsum board ceiling, gypsum board ceiling, mineral wool board ceiling, plywood ceiling, special-shaped long aluminum gusset ceiling, square painted aluminum gusset ceiling, color painting Glass ceiling, aluminum honeycomb perforated sound-absorbing panel ceiling, whole room duplex ceiling, etc.

2. The method for the boom to go out of the top surface of the ceiling: the direct top method: the boom that goes directly out of the surface layer of the ceiling, the drilling position of the board surface is not easy to be aligned during installation. You can also install the hanger first and then find the hole on the ceiling cover panel, if it is not right, it will affect the decorative effect. The method of adding casing: first, open the casing hole at the corresponding position on the top surface of the ceiling, and the suspension rod passes through the casing, so that the suspension rod has a room for movement, and the decoration is also more beautiful.

3. The chandelier refers to the high-grade decorative lighting that is hoisted on the indoor ceiling. Whether the chandelier is hung with wires or iron supports, it should not be hung too low, obstructing the normal sight of people or making people feel dazzling. Take the chandelier in the dining room as an example. The ideal height is to form a pool of lights on the dining table, but it will not obstruct the sight of everyone on the table. At present, the hanging support of the chandelier has been installed with a spring or a height adjuster, which can be adapted to different heights and needs of the floor.

The boom should have a certain length of thread for height adjustment. If the light box is suspended from the boom or sling, attention must be paid to the connection.

The above content is how the chandelier is fixed on the top. When these people choose the chandelier, they must also consider the installation method. In addition, there may be some problems in the installation process. For example, the installation is not in place or the appropriate location is not found, which may affect the effect of use. You can take a look at the above content to understand the precautions for chandelier installation and make your own decision.