EnjoyLED

How to make hemp rope chandelier

When decorating self-built houses in rural areas, clever use of some items can improve the indoor aesthetics, such as hemp rope chandeliers. What is the production method of hemp rope chandeliers?

1. What is the production method of hemp rope chandeliers?

1. Preparation

First, prepare the tools for making hemp rope chandeliers, such as pens, hemp ropes, balloons, white latex, light bulbs, super glue, etc. First inflate the bubbles, and use a pen to draw a circle around the balloon interface as the final connection to the lamp. . Soak twine in white latex.

2. Fixed hemp rope

When the twine is soaked, take it out and remove the excess latex, then wrap the twine around the balloon, wrapping the balloon randomly until you feel the lampshade is shaped enough. However, there is no need to wrap the hemp rope in the area of the circle and the balloon interface drawn earlier. After wrapping the hemp rope on the surface of the balloon, fix the thread end with super glue. After the white latex on the twine is completely dry, puncture the balloon and remove the balloon.

3. Connecting lines

After the hemp rope lampshade is ready, connect the light bulbs and wires prepared in advance with the lampshade, then fix the hemp rope chandelier on the ceiling, and connect the line.

2. What are the precautions for the installation of chandeliers?

1). The installation position of the chandelier cannot be too low

The installation of chandeliers has certain requirements on the floor height and area of ​​the house. The floor height should generally be above 2.8m, and the area should be greater than 20 square meters, so that it will not feel depressing visually. The installation height of the chandelier should not be too low, otherwise it will hinder people's sight.

2). The chassis should be firm and safe

When installing the chandelier, you also need to pay attention to its firmness, and install it according to its instructions for use. If the weight of the lamp is more than 3 kg, it is best to use pre-embedded hooks or fix the hanger with expansion bolts on the roof for installation.

3). The boom connection should be firm

Usually, the hanging rod of the chandelier will have a thread, which can be used to adjust the height and use. After the installation is completed, it is necessary to carefully check whether the fixing of the chassis is firm, and whether the connection of the light box suspended by the sling is firm.

4). Power off before installation

The installation of any lamps and lanterns must be carried out under the condition of power failure. When installing, the power supply in the home must be disconnected first, especially when connecting wires and installing light bulbs, so as to avoid the danger of electric shock and pose a threat to life safety.

5), accessories should be handled with care

Some chandeliers have some crystals and other easily damaged decorations. When installing the chandelier, handle it with care and do not break the accessories of the chandelier.