EnjoyLED

What should I do if the remote control of the fan light does not respond?

What should I do if the remote control of the fan light does not respond?

Turn off the power supply, check whether the motor wiring is correct, if there is a wall control (light fan separate control), check whether the light fan switch is connected correctly.

2. For the ceiling fan lamp equipped with the remote control group, after removing the receiver, connect the brown and black wires of the motor to the live wire of the power supply, and the blue wire to the neutral wire of the power supply, and then turn on the power. The assembled receiver...

3. After eliminating the above possibilities, if the fault still exists, it is very likely that the fuse in the motor is burned out, and it should be returned to the factory for repair (try to use the original packaging when returning to the factory to protect the motor).

4. Check whether the 9P terminal in the switch box is loose or not in place. If so, it can be classified as one.