EnjoyLED

How to wrap christmas tree lights

At Christmas, most people will wrap the lanterns around the christmas tree. In fact, the method of wrapping is relatively simple, as long as it is fixed on the tree branch or on the branch, you can find a thicker branch. , and then make a few circles, and then you can wrap the other end of the lantern around other branches to fix it.

In fact, the decorative effect of christmas lanterns is still relatively good, but when purchasing products, you must buy products from large manufacturers through formal channels, so that the effect of use will be better, and in the process of use, there will be no appearance. In the case of short circuit, the safety factor is relatively high.

How to install the Christmas tree string lights?
First, choose the appropriate location for the Christmas tree
The appropriate location of the Christmas tree is generally determined according to the actual location. In most cases, many people choose to install the Christmas tree in the place where the light gathers at home, so that the visiting guests can see the shining Christmas tree as soon as the door is opened. Some people like to install the Christmas tree next to the sofa or the gate, which can emphasize the visual effect of the Christmas tree. The same is true for a fireplace or a wall by a window.

Second, choose the right christmas  string of lights.
String lights on a Christmas tree are the finishing touch, so be sure to choose carefully. The choice of Christmas tree string lights is mainly based on the overall style of the Christmas tree and personal preferences. If you like a more traditional style, it is recommended to use incandescent light bulbs with large volumes and different colors. This kind of light bulb has its own characteristics and can set off the Christmas atmosphere; if you prefer light and luxurious style, you can choose colorful small light bulbs, which have a good decorative effect.

Third, prepare the number of bulbs needed
Typically, a 7-foot tree requires at least 500 small lights; add 100 lights for every 1-foot taller. If you like high brightness and want a grand effect, you can use 150 bulbs per foot of height. All in all, the larger the circumference of the Christmas tree, the more bulbs it needs, so it is best to prepare more bulbs.
Fourth, prepare the tools

Remember to have the right tools ready before decorating your Christmas tree. For example, electric ladders or man-shaped ladders, choose tools with high safety as much as possible to avoid injury during the decoration process. And be sure to use standard wires and power extension cords to avoid the danger of leakage; the bulbs on each string of lights should not be too many, about 500 for a string, the number of bulbs is too large, the Christmas tree can not bear the weight, it will be dangerous .
Fifth, put the lights together
When installing the string of lights, it is best to coil the string of lights that were originally going to be wrapped around the Christmas tree first, so as to avoid entanglement between the strings of lights during decoration. And the bunches of light strings are also convenient when building the Christmas tree later.

Sixth, the scientific winding method
Power up the string first so you can visually see the pattern formed as you wrap it, decorating from the top of the tree down. If the tree is in a corner, you can pull from one side of the tree to the other and decorate along the front of the tree to the bottom. If the christmas tree is placed in front of the window, you can wrap the tree 360 ​​degrees and see the lights from the front and back. For a little 3D feel to the christmas lights, wrap strings of lights between tree branches.