EnjoyLED

How to prevent your chandelier from falling out of the ceiling!

Many friends are not very clear about the safety of the chandeliers and whether they can fall off. The installation instructions of the chandeliers are not very clear. Next, I will tell you about it.

The chandeliers are generally installed on the ceiling for lighting and decoration. Whether the chandeliers are hung with wires or iron supports, they should not be hung too low, hindering the normal sight of people or making people feel dazzling. Take the chandelier in the dining room as an example. The ideal height is to form a pool of lights on the dining table, but it will not obstruct the sight of everyone on the table. At present, the hanging support of the chandelier has been installed with a spring or a height adjuster, which can be adapted to different heights and needs of the floor.

Choice of chandeliers

Consumers are better off choosing chandeliers that can install energy-saving light sources. Do not choose a chandelier with an electroplating layer, because the electroplating layer is easy to fade over time. Choose chandeliers that are consistent inside and out in materials such as all-metal and glass.

Luxury chandeliers are generally suitable for duplex residences, and simple low-voltage lanterns are suitable for general residences. The most expensive and most expensive are crystal chandeliers, but there are very few real crystal chandeliers. Crystal chandeliers are mainly sold in Guangzhou, Shenzhen and other places. The sales in the north are very small. This is also related to the quality of the air in the north, because the dust on the crystal chandeliers is not easy to clean. .

Chandelier installation and schematic diagram

1. Fixing the chandelier: Similar to the ceiling lamp, the fixing of the chandelier must first draw the drilling point, use the impact drill to drill the hole, and then drive the expansion screw into the hole. It is worth noting that since the load of chandeliers is generally larger than that of ceiling lamps, metal hanging plates or hooks should be used to fix the ceiling first, and then the base of the chandeliers should be connected, which can make the installation of the chandeliers firmer.

2. Chandelier connection: screw on the bald head screw, and the base is installed. Connect the power wire, and wrap the exposed part of the copper wire with insulating tape. Then connect the boom to the base and adjust the appropriate height. Finally, install the lampshade and bulb of the chandelier.

Precautions for installation of chandeliers

1. Note that the chandelier cannot be installed too low: the use of chandeliers requires the house to have sufficient floor height. Whether the chandelier is installed in the living room or the dining room, it should not be hung too low, so as not to obstruct people's normal vision or make people feel dazzling. Generally, the boom is adjustable in height. If the house is low, the use of ceiling lights makes the house brighter and more generous.

2. Pay attention to the firmness and safety of the chassis: The most basic requirement for the installation of lamps is that they must be firm. When installing various types of lamps, they should be installed according to the requirements of the installation instructions of the lamps. If the weight of the lamp is greater than 3kg, it should be installed with pre-embedded hooks or directly fixed with expansion bolts from the roof.

3. Check the connection of the boom: Generally, the boom of the chandelier has a thread of a certain length, which can be used to adjust the height. In addition to carefully checking whether the fixing of the chassis is firm after installation, the light box suspended under the sling boom should pay attention to the reliability of the connection.

If you want to know more information about chandelier,please follow EJLED.COM,Zhongshan Enjoy LED Company is the top lighting manufcturers in China.