EnjoyLED

how to install led lights on ceiling

How to install the ceiling light? There are six steps in total. First, select the position first, hold the chassis with your hands and press it against the wall; second, use a pencil to mark the position of the screw; Insert the plastic expansion tube into the hole; fifth, pass the wire through the hole to connect the neutral wire and live wire, and then tighten the screw; finally install the light bulb and the mask.

When we renovate a new house, there are many places where we can install it without having to ask a master. We can do it by ourselves, just like installing a ceiling lamp. It's a very simple thing, and we can all do it ourselves. So how exactly? Let's look down.

1. First select the location to be installed, support the chassis with your hands and press it against the wall.

2. Then use a pencil to mark the position of the hole.

3. Release the base and drill it through the hole with an electric drill. The hole does not need to be too large. Generally, a No. 6 drill bit is sufficient.

4, insert the plastic expansion tube into the hole, be sure to choose the right size, so as not to fall too loose.

5. Pass the wire through the wire hole, then fix the base on the ceiling with screws, and finally connect the line according to the distinction between the neutral wire and the live wire.

6. Finally, install the light bulb and mask