EnjoyLED

How to clean the chandelier

1. Wear gloves to wipe the chandelier. First turn off the power. Then put gloves on both hands, moisten one of the gloves with the cleaner or the prepared mixture, and keep the other pair dry. When wiping down the chandelier, first wipe it with a damp glove, then dry it with a dry hand glove. With gloves on the hands, those corners of the chandelier that are usually hard to reach can now be wiped clean by just sticking your fingers in.

2. Clean the lamp with vinegar. Add two caps of vinegar to a basin of water and mix thoroughly, soak a rag in it, wring it dry and wipe the lamp. The lamps wiped out in this way are not only bright, but also won't generate static electricity, and are not easy to get dust.

3. Toothpick rubs the frosted glass lampshade skillfully. Wrap a soft cloth on the outside of the toothpick, then dip it in toothpaste to easily wipe away the dirt hidden in the recess.

Chandelier purchase skills
1. Carefully choose the hanging height of the lamp, the material of the lampshade and the lamp ball to avoid uncomfortable glare. Generally, the height of the chandelier is about 55-6cm away from the desktop. Of course, you can also choose a lamp that can be raised or lowered at will to facilitate the adjustment of its height.

2. No matter what type and style of lamps and lanterns you choose, maintenance and cleaning are also aspects to be considered when choosing. Generally more beautiful lamps are usually more complicated in structure and not easy to clean. However, if it is not cleaned frequently, the lamps and lanterns will be easily affected by moisture and dust, resulting in rust and paint peeling, and the lampshade will become dim due to dust.

How to install the chandelier
1. Choose a location. The first thing to do when installing a chandelier is to determine where the chandelier will be installed. For example, the chandeliers in the living room, dining room, and kitchen are installed in the middle, so that the light in each position is more even. In the bedroom, considering the impact of mosquito nets and light on sleep, try not to install chandeliers above the bed. In addition, the chandelier needs to be installed on a wall or ceiling that can bear the weight of the chandelier, such as masonry structure, and try not to choose a wooden wall, so as to avoid the danger of falling for a long time.

2. Remove the chandelier mask. Remove the chandelier mask. Under normal circumstances, the chandelier mask has two fixing methods: rotation and snapping. When removing, pay attention to avoid damaging the chandelier. After removing the mask, take off the lamp tube by the way. Avoid breaking the lamp during installation.

3. Install the base. Place the base at the predetermined installation position, mark the wall with a pencil, then remove the base, drill holes at the marked position with an electric drill, and then install the expansion bolts for fixing the base in the holes. Pay attention to the diameter of the drilled hole and the depth of the embedded bolts. Specifications match. Then put the base back to the predetermined position and fix it.

4. Connect the wires. After fixing the base, you can connect the power cord to the terminal block of the chandelier. It should be noted that the electrical contact between the two wires connected to the power cord of the chandelier should be good, and they should be wrapped with black tape and kept to a certain extent. If possible, try not to put the two wire ends under the same piece of metal to avoid short circuit and danger.

5. Install masks and pendants. After connecting the wires, you can test the power supply. If everything is normal, you can turn off the power and install the mask of the chandelier. The living room chandelier also needs to be equipped with a series of pendants, because each pendant pendant is different, so the specific installation method can refer to the product manual. Charms are generally left over and can be stored after installation and replaced later when needed.