LED lamps are divided into DC low voltage and AC high voltage. To connect the LED, we must first see the power supply voltage of the LED lamp. Let's talk about the wiring methods of different power supply voltages.
Tools:LED lamp, wire, plug wire, power supply, etc
raw materials: Pliers, wire stripping pliers, scissors, electrical tape and other tools
First of all, we get the LED lamp, carefully read the manual and see the power supply voltage.If it is 220V AC voltage, we only need to connect the plug wire we have prepared to the power supply line of the LED lamp.There are pink and blue plug wires. We can connect them directly. (AC regardless of positive and negative poles)
Connect the wire and wrap the interface with electrical tape.
Finally, just plug it into our socket.If our LED lamp is DC low-voltage, we need to further determine the power supply voltage.
To see whether it is 12V or 24V, we need to prepare the corresponding battery.Our LED lamps with low-voltage power supply usually have two red and black wires.Normally, the red line is the positive pole of the battery and the black line is the negative pole of the battery.We connect the red wire and black wire to the positive and negative poles of the battery respectively, and our LED lights can be lit normally.
